Unbranded CTL0151030F M6x1.00mm CHASER DIE 12mm D/HD TYPE S20

Jual Unbranded CTL0151030F M6x1.00mm CHASER DIE 12mm D/HD TYPE S20

Deskripsi Produk Jual Unbranded CTL0151030F M6x1.00mm CHASER DIE 12mm D/HD TYPE S20 
Cutting takes place only on the throat and the first full tooth; the remaining threads are above centre height and act as a nut, ensuring accurate pitch. Ideal for batch work or continuous production of threaded steel bar. Coventry dies are not interchangeable. An original set of new dies must always be used together. When taken from the diehead the set of dies should be retained in its box until required again.

THROAT ANGLES :
20° for general work and soft steels – supplied as standard.
33° ‘B’ type for cutting brass, available on request.

GRINDING DIES :
Only two angles are ground on Coventry dies, the throat angle and the rake angle and in the particular case of Holozone dies only the throat angle is ground. All dies in a set must be ground on the throat at the same time and since they cannot be accurately ground by hand, a die grinding fixture must be used.

MARKING & MATERIALS :
Each die is marked with diameter, pitch, type of die and gauge number. Non-standard or special dies are marked with an SD number which should be quoted when re-ordering. When a set of dies has been re-ground several times by grinding the throat angle, the height of the cutting edge rises above centre. This condition must be rectified by grinding the rake angle until the die height is correct according to the number shown on the die.

Spesifikasi :

Thread Standard	: ISO Metric
Compatible Diehead Type	: Coventry
Compatible Diehead Size	: 12mm
Lip Type	: S
Thread Size	: M6x1.00mm
Material	: High Speed Steel
Thread Direction	: Right Hand
Throat Angle	: 20°
Finish/Coating	: Uncoated

Baca juga : Unbranded CTL0151024N M5x0.80mm CHASER DIE 12mm D/HD TYPE S20 CTL0151024N 

---

• Dengan melakukan pembelian di ONEBIZ.id berarti Anda sudah setuju dengan syarat dan ketentuan yang berlaku. Untuk melihat syarat dan ketentuan, silahkan klik link berikut ini Syarat dan Ketentuan Pembelian.
• ONEBIZ.id memberikan fasilitas pengiriman gratis, untuk melihat syarat dan ketentuan fasilitas pengiriman gratis, silahkan klik link berikut ini Syarat dan Ketentuan Pengiriman Gratis.
• Anda dapat mengajukan pembayaran tempo kepada kami. Untuk melihat syarat dan ketentuan pembayaran tempo, silahkan klik link berikut ini Syarat dan Ketentuan Pembayaran Tempo.
• Untuk proses approval di perusahaan Anda, kami menyediakan kemudahan bagi Anda untuk membuat Penawaran Online. Untuk mengetahui cara membuat Penawaran Online, silahkan klik link berikut ini Panduan Penawaran Online. Kelebihan Penawaran Online:
  1. Lebih hemat waktu. Anda tidak perlu menunggu team sales kami mengirimkan Penawaran untuk Anda.
  2. Lebih fleksibel. Anda dapat menentukan sendiri produk & jumlah sesuai kebutuhan Anda.
  3. Lebih cepat. Penawaran Online akan dikirim langsung ke alamat email Anda setelah disetujui oleh sistem kami.